How to Choose the Right Ceramic Foam Filter for Aluminum Casting: PPI, Size, and Flow Rate
Choosing the right ceramic foam filter for aluminum casting requires more than selecting a PPI number. The filter must match […]
Blog
Integrated Aluminum Degassing and Filtration Line Successfully Commissioned in Indonesia
AdTech has successfully completed the installation, commissioning, and on-site acceptance of an integrated aluminum degassing and filtration line in Indonesia.
Why Do High-Magnesium Aluminum Alloys Corrode Degassing Box Linings More Aggressively?
High-magnesium aluminum alloys can attack degassing box linings more aggressively because magnesium increases the chemical reactivity of the molten alloy
Blog
AdTech Expands Ceramic Filter Manufacturing for Aluminum Melt Purification
Aluminum melt purification requires coordinated control of dissolved hydrogen, non-metallic inclusions, and molten metal transfer conditions. Ceramic foam filters, online
Custom Aluminum Launder Systems for Molten Metal Transfer
Aluminum launder systems connect melting and holding furnaces with filtration units, degassing equipment, and casting machines. For aluminum casthouses and
At ALUMINIUM 2026: AdTech Discusses Practical Melt Treatment Needs with Aluminum Industry Customers
As ALUMINIUM 2026 comes to a close in Düsseldorf, AdTech Metallurgical Materials Co., Ltd. is wrapping up three days of
Meet AdTech at ALUMINIUM 2026 in Düsseldorf
This October, AdTech Metallurgical Materials Co., Ltd. will travel to Düsseldorf, Germany, to take part in ALUMINIUM 2026, taking place
Blog
Classification and Application of Aluminum Alloys
Aluminum alloys are commonly classified by their principal alloying elements, manufacturing route, and heat-treatment response. The major wrought aluminum alloy
Blog
When Should an Aluminum Plant Upgrade from Manual Degassing to On-Line Degassing?
An aluminum plant should consider upgrading from manual degassing to on-line degassing when production becomes more continuous, hydrogen control needs
Blog
How to Remove Hydrogen from Molten Aluminum Before Casting
Hydrogen is the main dissolved gas that causes gas porosity in aluminum castings. Because molten aluminum can dissolve significantly more